sensorProbeX+

The latest generation of sensorProbe devices, in a form factor that allows for 1U, 0U and DIN rail mounting. A low profile design that is economical on cabinet space. sensorProbeX+ comes in several standard configurations, or can be customized by choosing from a variety of modules such as dry contact inputs, IO’s, internal modem, analog to digital convertors, internal UPS and additional sensor ports.

• Every sensorProbeX+ is equipped with Ethernet, Modbus RS485, EXP and BEB communications
• Compatible with sensorProbeX+ EXP and BEB units, expand the capabilities of your device.
• 1U rackmount brackets, Tool-less 0U mounting or DIN rail mounting options.
• Notification by SNMP, Email, SMS (requires optional cellular modem), built in buzzer.
• Compatible with wide range of AKCP Intelligent sensors.
• Start with base configuration and build up your device with modules you need.
• Up to 80 virtual sensors.

Intelligent Sensors

sensorProbeX+ is compatible with all AKCP Intelligent sensors, making it an extremely versatile and cost effective monitoring solution. From the data center, to remote sites, industrial controls it has you covered.

Environmental Monitoring Sensors

Wherever monitoring of environmental conditions is important to your daily operations and health of equipment, deploy sensors to monitor temperature, humidity, airflow and water leaks.

Security Sensors

RFID Access control swing handle cabinet locks, door contacts and motion detectors will keep you in tune with the security situation at your sites down to cabinet level. Control who can access and when with RFID access control, centrally managed and monitored through AKCPro Server.

Power Sensors

AC Voltage detection, DC volt meters, sensor controlled relays and power metering can all be done on the SPX+

Specialized Sensors

Tank depth pressure sensors can monitor for liquid levels in fuel tanks, oil storage, chemical tanks and so on. Any tank up to 2 meters in depth can be monitored. Alarms generated when levels drop to critical levels, making sure you can re-fill with sufficient notice. Other specialized sensors include the keyswitch override, to disable notifications while maintenance work is being performed, and a programmable LCD display.

• Input Range : 100-240 VAC
• Output : 7.5 VDC 1.2 Amp
• Power Output : 9.0 Watt
• Over Voltage Protection : Yes
• Over Current Protection : Yes
• Operating Temp. Range : 0 to +40 °C

This power supply is used for the following products:

Important Note: These spare power adapters are ONLY for sensorProbe units that shipped prior to August 2017. Please verify the voltage of your sensorProbe before ordering replacement power supplies.

• sensorProbe2 (7.5 VDC version shipped before August 2017)
• sensorProbe8 (7.5 VDC version shipped before August 2017)
• Previous Universal Mount Fixed Camera (UMC)

Power Supply: 100-240 VAC to 7.5 VDC 3 Amp – IEC Adapter

• Input Range : 100-240 VAC
• Output : 7.5 VDC 3 Amp
• Power Output : 22.5 Watt
• Over Voltage Protection : Yes
• Over Current Protection : Yes
• Operating Temp. Range : 0 to +40 °C

This power supply is used for the following products:

• sensorProbe8-X20
• sensorProbe8-X60
• securityProbe
• securityProbe-X20
• securityProbe-X60

12 VDC Power Supply

DC to DC converter which generates an output of 9.0 volts

This DC power supply comes in an external box for use with all AKCP sensorProbe and securityProbe devices.

8 Port Relay – Sensor Controlled Relay

The 8 Port Relay is specially designed multiport relay for advanced process control

The relay can provide automatic responses to sensor status changes.

5 Dry Contact Inputs (SP2 / SP2+ Only)

Add 5 dry contacts per RJ45 port on the SP2 and SP2+

These dry contact ports can be used to monitor any dry contact inputs through an RJ45 sensor port. Have up to 10 dry contacts on an SP2 and 20 on an SP2+. The sensor requires the 10 dry contact unlock license for the SP2. On the SP2+ 5 dry contact licenses are sold on a per-port basis. The dry contacts on the 5DCS are input only, if you require I/O on a sensor port, use the single dry contact cable (DCS15).

• Powered by the base unit

Spare AC Adapter

AC to DC adaptor with a standard IEC type connector

This power supply is compliant with most safety regulations including UL, GS, and CE.

Pan Tilt Dome Digital Camera

Visually inspect your enterprise assets and resources via your browser from anywhere in the world

The AKCP Pan Tilt Dome Digital Camera is designed to provide greater functionality to the securityProbe range of devices.

Universal Mount Digital Camera – IR Enabled

Visually inspect your enterprise assets and resources via your browser from anywhere in the world

The AKCP UMDC has IR night vision capability and delivers between 15fps and 30fps depending on the resolution selected.